Categorías
Etiquetas
Informacion para Tecnicos de Sistemas y Microinformatica
Temperature Control Error 1. Repower the printer. If problem is not resolved go to step 2. 2. Improve the connection between the fusing unit and its connectors. Remove the fusing unit and reset. 3. Does heat lamp (H1) come on when the power supply is turned on? NO, Replace the fusing unit. […]
Access Denied Menus Locked The control panel function you are trying to use has been locked by the network administrator to prevent unauthorized access. Ask the network administrator to unlock the function. Bad Duplexer Connection The duplexer is not correctly installed. 1 . Ensure that the right-angle power cord […]
10.00.00 Supplies Memory Error alternates with 10.10.00 The printer is unable to read the electronic info on the print cartridge Replace print cartridge 13.XX Paper Jam [Location] Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor […]
Una de las averias mas tipicas es tener una CPU que se apaga al poco rato de encender el sistema; siempre teniendo en cuenta que esto no es a raiz de alguna actualizacion de Drivers o instalacion de algun Hardware nuevo en nuestro sistema, de lo primero que tenemos que sospechar es de la refrigeracion […]
Una CPU que se reinicia es siempre dificil de diagnosticar. Si el equipo se apaga en vez de reiniciarse, casi siempre es por causa Termica, vease ventiladores sucios o F.A defectuosa. En cambio si es un reinicio aleatorio y no es posterior a ninguna actualizacion ni a ninguna instalacion de Drivers, estaremos en la duda […]